Различия

Показаны различия между двумя версиями страницы.

--- конфигурирование [2022/06/28 21:38]
prizzrak14
+++ конфигурирование [2023/10/20 00:33]
Admin
@@ Строка 1: / Строка 1: @@
-==== Boot sequence: ====
-  * Trying to load JSON config from NVRAM. If config is valid JSON structure - start to operating (to avoid dependance from network and allow local control)
-  * Trying to retrieve MAC address, stored in NVRAM. If ok - using retrieved MAC. If not - using CUSTOM_FIRMWARE_MAC (see compilers directives). If not configured - using hardcoded DEFAULT_FIRMWARE_MAC = {0xDE, 0xAD, 0xBE, 0xEF, 0xFE, 0}
-  * Starting LAN with DHCP or with static ip if configured
-  * Trying to load JSON config from  address "http://MY_CONFIG_SERVER/12-12-12-12-12-12.config.json", where "12-12....12" is controller's MAC address and MY_CONFIG_SERVER - compiler's directive. If not configured = lazyhome.ru used
-  * After parsing of loaded config, performing re-initialization of objects, except number of DMX channels. There is possible to store loaded config in NVRAM after some testing using "save" cli command.
-  * Connecting to MQTT server according stored or retrieved config.
-  * Subscribing to OUTTOPIC (/myhome/s_out/# by default) for 5 sec. Retrieving and executing all persistent topic (restore recent values)
-  * Unsubscribe from OUTTOPIC, Subscribe for INTOPIC (/myhome/in/# by default) and start processing normal incoming event flow
 ==== Operation ====

LightHub